Audison AP 8.9 bit Prima

Artikel 94 von 110 in dieser Kategorie
  • to beginning
  • end
unser bisheriger Preis 719,00 EUR
649,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Art.Nr.:
12538
EAN:
8018823112994
Lieferzeit:
2-3 Tage (Ausland abweichend)
Artikeldatenblatt:
Drucken
Preisanfrage:
Preisanfrage
Merken:
- +
- 5 % bei Vorkasse!

audison Prima AP 8.9 bit 8-Kanal Endstufe mit DSP


Compact amplifiers with built-in DSP featuring 7 "Drive" presets, providing the ability to take complete advantage of the bit Drive potential with just a simple selector: the Audison team has developed 7 DSP presets, fine-tuned for the most common setups specific to the amplifier model. The Audison Prima amplifiers are all D Class Full Range. Quick release connectors facilitate Plug&Play installations using wiring kits specific for different car models, maximum integration with the vehicle’s OEM system.

The Audison Prima amplifiers are characterized by extremely compact dimensions and elegant look. For the first time, Audison has made an amplifier equipped with a built-in processor. This feature opens a new era: the incredible power of our DSP is now put at the service of OEM Integration. The presence of the processor ensures full compatibility of Prima amplifiers with the bit Drive technology: the amplifiers feature seven Drive presets corresponding to different system setups, selectable according to your own preference via a rotary dial. This solution reduces the setup time to a minimum, also eliminating any possibility of error. It is also possible to create your own preset through the PC software supplied with the product, giving you finger-tip control of all the DSP’s parameters. Additionally, thanks to the bit Drive Portal, more presets can be downloaded and shared with the other users in the community. The built-in DSP functions are similar to those found on bit Ten and bit One, but there is something new and important on the equalizer output. Unlike a 31-band graphic equalizer, the AP bit equalizer features 10 parametric “poles” to draw the target curve via the PC software. This solution preserves a noticeable amount of resources for the DSP, with the plus of providing better acoustic response, thanks to the drastic reduction of phase variations found in graphic equalizers. The R&D team succeeded in the difficult task of condensing traditional Audison power and quality into the palm of your hand. The reduction in dimension was achieved with the use of a special power supply, never employed in Car Audio, along with the most advanced electronic components available in the market. All of this together, provides the ability to achieve high power delivery, ensuring, at the same time, unheard of thermal stability.
To respond to the need of connecting the amplifier to the OEM amplifiers power supply cables, often with reduced gauge, the Audison R&D team equipped the Prima amplifiers with an innovative management circuit which constantly monitors in real-time the power supply current consumption. If a high amount of current is requested for a long duration, which may heat up the cables, the circuit immediately limits only the power peaks, letting the amplifier continue to play. This solution provides higher safety and reliability in OEM upgrade applications. The innovative power supply stage ensures very high efficiency and stability for the amplifiers, capable of short term operation with as little as 7 Volts! This eliminates the numerous problems and disadvantages integrating aftermarket systems with vehicles featuring Start&Stop technology. In order to solve the problem associated with OEM amplifiers that feature signal interruption, shutting down when a proper speaker "load" is not present as often found in aftermarket Integration, the Prima amplifiers feature ASP (Automatic Speaker Presence). Available as an optional plug-in accessory, this circuit provides the ability to simulate the OEM speakers’ presence during the short time frame the head unit performs the check after being turned on, thus avoiding any interruption of the signal being sent to the amplifier. The Prima amplifier line is made up of three models featuring a nine channel DSP, all channels independently adjustable via PC software.


AP8.9 bit

8 channel amplifier featuring 9 channel built-in processor.

The AP8.9 bit amplifier was designed by Audison R&D Department to achieve maximum sound quality in OEM Integration applications. The powerful management software proves the ability to acquire the bit Drive presets which the Audison team fine-tuned specifically for your car. Thanks to the innovative power supply stage, a power of 520 W total can be achieved in an extremely compact case. The non-amplifiable ninth channel can be used to drive a subwoofer via the mono AP1 D amplifier.


Die technischen Daten des Audison AP 8.9 bit Verstärkers:

- Spannung 7,5 - 15V DC
- Maximale Leistung an 4/2 Ohm Watt: 280 / 520 RMS
- Pre Out: 1 ch RCA x AP 1D or SUB AMP
- Inputs: 6 ch wired high-low level:
1) F / R + AUX Stereo
2) 2 Way F + R
3) F / R + Center + SUB
- High Level Input mit Autosense
- Low Level Input
- Übertragungsbereich 10 - 22 kHz
- S / N Ratio: 95 dBA
- 9 frei programmierbare Kanäle
- Subwoofer Ausgang
- optischer Eingang S / P DIF PCM 96 kHz / 24 bit
- Anschluß für DRC


Ausgangsleistung:
- 8x 35 / 65 Watt an 4 / 2 Ohm
- 4x 130 Watt an 4 Ohm

DSP Sektion:
- Weiche: Full / High Pass / Low Pass / Band Pass
- Weiche Typ: Linkwitz 12 / 24 dB - Butterworth 6 / 12 / 18 / 24 dB
- Frequenzen: 68 Steps von 20 - 20 kHz
- Phasenumkehrung: 0° / 180°
- Analogic Inputs Equalizer: Automatic De-Equalizzation
- 9 Para EQ Bänder + / - 12dB
- Laufzeitkorrektur bis 510 cm in 2,8 cm Schritten, Feinjustage 0,7 cm
- 7 Presets speicherbar
- Acoustical Preset: N.2 DSP Memory, DRC selectable

Anschlüsse:
- Micro USB
- DRC Control
- Automatik Speaker Presence
- 12V Control für optischen Eingang / AUX / Master

Abmessungen:
191 x 34 x 131 mm (L x H x B)
Gewicht: 1,5 kg 

Power Supply
- Betriebsspannung: 7.5 - 15 VDC
- Ruhestrom: 1,5 A
- Ruhestrom (ausgeschaltet): <0.04 mA
- max Musical Power: 30 A
- Remote In: 7 - 15 VDC (1 mA)
- Remote Out: 11 - 15 VDC (200 mA)
- Sicherung (AFS): 30 A
- ART (Automatic Remote Turn on / off): Speakers to input - selectable
- AST (Automatic Signal Turn on / off): Pre-In to input - selectable
- CPL (Continuous Power Limiting): Max continuous power - selectable

Amplifier Stage
- Klirrfaktor THD (1kHz @ 4O, 90% Power): 0.05 %
- Frequenzbereich (-3 dB, 2 V RMS, 4O): 10 - 22k Hz
- Geräuschspannungsabstand: 95 dBA
- Dämpfungsfaktor @ 1 kHz, 2 V RMS, 4O): >70
- Eingangsempfindlichkeit: 2 - 15 V RMS
- Eingangsimpedanz: 15 kOhm
- Anschlussimepedanz: 8 Ch: 2 Ohm; 4 Ch - Bridge (1-2) (3-4) (5-6) (7-8): 4 Ohm

Allgemeine Vorrausetzungen
- PC Verbindungen Micro USB (1.1 / 2.0 / 3.0)
- Software/PC Bedingungen: Microsoft Windows (32 / 64 bit): XP, Vista, Windows 7, Windows 8
- Grafik Karte min. Auflösung: 800 x 600
- Betriebstemperatur: 0 °C bis 55 °C (32°F bis 131°F)

Signal Verbindung:
- Sub Out (RCA Pre-Out) 0-4V RMS Max
- Input Stage:
Config 1: High / Low level FL-FR-RL-RR + N.2 customizable
Config 2: High / Low level FL-FR-RL-RR + Stereo Aux In (DRC select.) Optical IN (max 96 kHz / 24 bit): S / P-DIF PCM 96 kHz / 24 bit max

Komibinierbar mit:
- AP1 D

Lieferumfang: 1 Endstufe inkl. Produktanleitung und Einbauzubehör


Mehr von und über audison...

Diese Produkte wurden ebenfalls gekauft
- 5 % bei Vorkasse! 
10mm² Powe...
2,49 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Grundpreis: 2,49 EUR pro m
- 5 % bei Vorkasse! 
10mm² Powe...
2,49 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Grundpreis: 2,49 EUR pro m
- 5 % bei Vorkasse!
Feinadrig a...
0,49 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Grundpreis: 0,49 EUR pro m

Ihre Frage zum Produkt


Art der Anfrage:
Ihr Name:
Ihre E-Mail Adresse:
Ihre Anfrage oder Anmerkung:
Bitte beantworten Sie folgende Frage:
Welche Farbe hat die Sonne?
Ihre Antwort:

 
Weitere Artikel aus dieser Kategorie:
Kunden die diesen Artikel angesehen haben, haben auch angesehen:
Crimpzangenverleih
Hersteller