Powerbass M - 124 Subwoofer 30cm (12") Single Ohm

PowerBass M Series Subwoofer

Übersicht zu den wichtigsten technischen Eigenschaften des Powerbass M -124 Subwoofer 30 cm (12"):

- Proprietary 4-layer, Non-pressed Paper, DDC Finish Cone Dynamic Damping Coating (DDC)
- Large Roll Santoprene Surround
- Black Emissive Coated Backplate and Pole Piece Dome
- Massive Motor Structure
- Dual and Single 4-ohm Voice Coils
- 2 and 2.5" Vented BASV Voice Coil Formers
- Chrome Push Terminals
- Rigid Tooled Basket with Black Powder Coat Finish
- Optimally Designed for Both Sealed or Ported Enclosures

Size: 12"

Power Handling (RMS/Peak): 375/750 watts

Nominal Impedance: Single 4-Ohm or Dual 4-Ohm 

Voice Coil Size: 2 in

Frequency Response: 29Hz - 450Hz

Sensitivity: 92dB

Motor Structure: 164 oz

Mounting Depth: 5.4 in

Single 4-Ohm
VC Impedance: 4 Ohm + 4 Ohm
Test Impedance: 1.6 Ohm
Resonanzfrequenz (Fs): 29 Hz
SD: 510.7 sqCM
Äquivalentvolumen (Vas): 212.2 Ltr
Nachgiebigkeit d. Membraneinspannung (Cms): 236.8 µM/N
Membranmasse (Mms): 139.1 g
Kraftfaktor (BL): 13.6
Mechanische Güte (Qms): 3.6
Elektrische Güte (Qes): 0.46
Gesamtgüte (Qts): 0.41
No: 0.32%
Spl: 92 dB
Maximale Auslenkung (Xmax): 9.5 mm

Dual 4-Ohm
VC Impedance: 4 Ohm + 4 Ohm
Test Impedance: 1.6 Ohm
Resonanzfrequenz (Fs): 29 Hz
SD: 510.7 sqCM
Äquivalentvolumen (Vas): 68.7 Ltr
Nachgiebigkeit d. Membraneinspannung (Cms): 161.2 µM/N
Membranmasse (Mms): 165 g
Kraftfaktor (BL): 9.86
Mechanische Güte (Qms): 3.3
Elektrische Güte (Qes): 0.54
Gesamtgüte (Qts): 0.49
No: 0.275%
Spl: 92 dB
Maximale Auslenkung (Xmax): 9.5 mm

Die technischen Merkmale des Powerbass M- 124 Subwoofer 30cm (12") im Detail:

Sublime Balance of Performance and Value
The M Series Subwoofer line represents PowerBass as a performance and value leader. These woofers are designed to deliver rich sounding bass at all volume levels. Check out the high-tech features: 4-layer non pressed paper DDC (Dynamic Damping Coating) finish cone, large roll Santoprene® surrounds which allow free movement of the cone for maximum SPL, a large motor structure for high-power handling, 2" and 2.5" vented BASV Voice Coil formers for optimum performance, and cooling for maximum heat dissipation.

For increased operating efficiency a CNC machined one piece backplate and pole plate is used to reduce magnetic losses and maximize air flow keeping the voice coil running cooler. Chrome-plated binding post terminals accept large gauge wire to assure all power from the amplifier reaches the subwoofer.

Designed to work optimally in sealed or ported enclosures and either dual or single 4 ohm voice coils for multiple bass applications. Try the mighty M Series today!

Powerbass hat den klaren Fokus