-5% Rabatt bei Vorkasse!
Whether you're looking to drive high frequency
component speakers or low frequency subwoofers, the P400-2 has the power and
flexibility you need to put some serious PUNCH in your vehicle. The power
available from such a small amp means it's a great match for a 2-ohm DVC
subwoofer or pair of 8-ohm SVC subwoofers.
|
12dB/octave crossover |
|
4 Gauge power/ground terminals |
|
Audiophile grade speaker connections |
|
MOSFET output stage |
|
MOSFET power supply |
|
RCA pass-thru |
|
Top Mounted LED
Indicators |
| Description |
Value |
| CEA-2006
Compliant |
Yes |
| Number of
Channels |
2 |
Rated Power
continuous
power |
100W x 2 @ 4-Ohms RMS
200W x 2 @ 2-Ohms RMS
400W x 1 @ 4-Ohms bridged RMS |
Total Power
total sum of 'rated
power' |
400 Watts |
Dynamic
Power
powercube
measurement |
140 Watts x 2 @ 4-Ohms 0° Res
334 Watts x 2 @
2-Ohms 0° Res |
| Bridgeable |
Yes |
| Efficiency
(average) |
70% @ 4-Ohm
65% @ 2-Ohm |
| Crossover
Controls |
High-Pass (HP): 50Hz-500Hz 12dB/octave Butterworth
Low-Pass (LP): 50-500Hz 12dB/octave Butterworth |
| Tone
Controls |
Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Punch
EQ2 Treble: 0dB to +12dB @ 12kHz
Function depends upon LP/AP/HP
switch position |
| Signal
Input |
Low level: 1 RCA pair |
| Signal
Output |
Low level: 1 RCA pair |
| Power Input
Connector |
Block |
| Power Wire
Gauge |
4 AWG |
| Speaker
Output Connector |
Screw terminal barrier strip |
| Speaker Wire
Gauge |
8 AWG to 18 AWG |
| Heat Sink
Type |
Cast aluminum |
| Cooling |
Convection |
| Remote
Controls |
Optional PEQ Remote Punch EQ
(overrides built-in
Punch EQ2) |
| Visual
Indicators |
Power
Thermal
Protect |
| Circuit
Topology Class |
Class A/B |
| Frequency
Response |
20Hz to 20kHz +/- 1.0dB |
| Shipping
Weight |
7.25 Lbs.
(3.28 Kg.) |
| Dimensions
(HxWxL) |
2.25 x 7.625 x 10.25 (in)
5.71 x 19.37 x 26.03
(cm) | |
